STRUCTURE

RH-06 - RH-28 CE Approved

RH-06 - RH-28 General Models without CE Approved
  1. Outer Frame:
    CE approved, 94 V0 Fireproof material.
  2. Inner Rack:
    CE approved, 94V0 Fireproof material.
  3. Handle:
    Worldwide Patent Pulling Function Handle, 94V0 Fireproof material.
  4. Top Cover:
    94V0 Fireproof material, with Ventilator.
  5. Bottom Cover:
    Coating Iron without Ventilator.
  6. Pin:IDE - 40Pin :
    SCSI - 50Pin ; Wide - SCSI - 68Pin.
  7. Connector of Inner Rack & Outer Frame :
    Centronic 50Pin, UL approved.
  8. Keylock of Inner Rack & Outer Frame :
    Mechanical keylock, Electronic keylock and Push Button for choice
  9. LED light & Wire :
    Size of light head : 2 x 5 m/m ±0.05m/m Wire Depth of light head: 6.4±0.1 m/m Wire Material - UL approved
  10. Cooling Fan:
    Material -94V0 Fireproof, UL approved.
  11. Large 4Pin Female Base :
    Connected with large 4Pin Male Base of H.D.D. Color-Yellow, Black, Black, Red.Wire Material - UL approved.
  12. Screw:
    Material - China Steel CHQ M/T 6#X6.
  13. Clip Spring:
    Installed on both sides of inner rack & outer frame for Grounding. Material - Metal with Chrome electroplated.
  14. Power Cord:
    To check the length and color (Yellow, Black, Black, Red) of wire and if the tinned status is in good condition.
  15. 40-50Pin:
    1. To check if the pins are bent and broken.
    2. To check if the position between pin of PC board and the pin is right.
    3. To check if the electroplating of the pin is qualified.
    4. To test if the 40pin, 50pin and the connector are available.
  16. Lock:
    Material - Zinc, Electroplating on surface.
    1. The front side of lock must be smooth.
    2. The size of lock should be matched with the drawing (inclusive of lock stick and lock piece).
    3. The switch of lock should be working smoothly.
    4. The electroplating on front side of lock should be polished.
    5. The length of lock stick should be in 10.0 m/m +0.3m/m.
  17. PC Board:
    Material -FR - Oxyacetylene Resin, Glass Fiber.
    1. To check the circuit drawing of PC board.
    2. To check the position of all parts on PC board.
    3. To check other details.
  18. Fan:
    Material - 94V0 Fireproof, UL approved.
    1. To check if it can be well working after installed on instrument.
    2. To check if the position of four screw holes is right.
  19. Electronic Parts:
    They were made in accordance with the Standard of Parts Voltage/Current of H.D.D. and were approved by Security Standard.
  1. Outer Frame:
    Material-ABS Plastic:Brand-Chi-Mei 707.
  2. Inner Rack:
    Material-ABS Plastic:Brand-Chi-Mei 707.
  3. Handle:
    Worldwide Patent Pulling Function Handle, Material-ABS Plastic:Brand-Chi-Mei 707.
  4. Top Cover:
    Material-ABS Plastic:Brand-Chi-Mei 707, with Ventilator.
  5. Bottom Cover:
    Coating Iron without Ventilator.
  6. Pin:IDE:
    IDE - 40Pin ; SCSI - 50Pin ; Wide - SCSI - 68Pin.
  7. Connector of Inner Rack & Outer Frame:
    Centronic 50Pin ,64Pin - 96Pin with UL approved.
  8. Keylock of Inner Rack & Outer Frame :
    Mechanical keylock, Electronic keylock and Push Button for choice
  9. LED light & Wire:
    Size of light head : 2 x 5 m/m ±0.05m/m Wire Depth of light head: 6.4±0.1 m/m Wire Material - UL approved
  10. Cooling Fan:
    Material -94V0 Fireproof, UL approved.
  11. Large 4Pin Female Base:
    Connected with large 4Pin Male Base of H.D.D. Color-Yellow, Black, Black, Red.Wire Material - UL approved.
  12. Screw:
    Material - China Steel CHQ M/T 6#X6.
  13. Power Cord:
    To check the length and color (Yellow, Black, Black, Red) of wire and if the tinned status is in good condition.
  14. 40-50Pin:
    1. To check if the pins are bent and broken.
    2. To check if the position between pin of PC board and the pin is right.
    3. To check if the electroplating of the pin is qualified.
    4. To test if the 40pin, 50pin and the connector are available.
  15. Lock:
    Material - Zinc, Electroplating on surface.
    1. The front side of lock must be smooth.
    2. The size of lock should be matched with the drawing (inclusive of lock stick and lock piece).
    3. The switch of lock should be working smoothly.
    4. The electroplating on front side of lock should be polished.
    5. The length of lock stick should be in 10.0 m/m +0.3m/m.

     

  16. PC Board:
    Material -FR - Oxyacetylene Resin, Glass Fiber.
    1. To check the circuit drawing of PC board.
    2. To check the position of all parts on PC board.
    3. To check other details.

     

  17. Fan:
    Material - 94V0 Fireproof, UL approved.
    1. To check if it can be well working after installed on instrument.
    2. To check if the position of four screw holes is right.

     

  18. Electronic Parts:
    They were made in accordance with the Standard of Parts Voltage/Current of H.D.D. and were approved by Security Standard.

E-Mail: gigacorp@videotron.ca