RH-32

Aluminum Driver Carrier 3.5" HDD, 1"Height Mobile Rack Compatible with RH17
Rh-32.jpg (3691 bytes)
RH-32 Series (For 3.5" & Half-Height 3.5" H.D.D.)
Functions:
Easy slide out drive carrier Functions Handle Drive Lock and DC Power Switch Key Lock Aluminum Drive Carrier to Provide Cooling Capacity for 7200RPM H.D.D.
¡@
Interface IDE,U/DMA,SCSI Single end:
RH-32 of mobile racks provides a excellent heat-spread of environment for high speed HDD.Also,it has a pulling function handle with worldwide patent to remove HDD easily.

SPECIFICATIONS:

Environmental Specifications
Operating Storage
Ambient Temperature -5¢XC to 45¢XC -20¢XC to 60¢XC
Relative Humidity(1) -10% to 80% 10% to 90%
Alititude -1,000 to 50,000ft -1,000 to 50,000 ft
-304m to 15240m -300m to 15,240m
Shock More then StorageDriver
(1)Non-condensing with maximum Gradient of 10%per hour
¡@
PHYSICAL DIMENSIONS
Physical
Specifications
Inner Rack
Carrier
Outer frame
Receiving frame
Height 35.70mm (1.406") 42.40mm (1.669")
Width 119.00mm(4.685") 146.00mm (5.748")
Depth 202.00mm (7.952") 219.00mm (8.622")
Weight 0.41Kg (0.9Ibs) 0.25Kg (0.55 Ibs)
Chassis Reliability/Maintainability
MTBF 500,000 Hours
Connector insert cycle Surpass 2,500 times
Preventive Maintenance None
The Mobile Rack was made with heat-spreading vents on front side and from those vents air is into H.D.D. Hence the High-Capacity H.D.D. would be with good performance of heat-spreading and would easily read data without any mistakes.

E-Mail: gigacorp@videotron.ca