RH-30 Multiple Storage Driver Mobile Rack

RH-30 Series (For 3.5" & Half-Height 3.5" H.D.D.)

Powerful Easy-to-Use Functions: 

• Patent Pulling Handle For Quick Drive Carrier Release.
• Power ON/OFF Key Locj To Avoid pulling out when working.
• Durable Centronic Connector 2500 Insertion And Removal cycles.
• Two LED To Indicate DC.Power And Driver Activity.
• Patent AUTO-DOOR Set To Avoid Dust When Drive Carrier is pull out.

¡@

BOTH ATAPI AND SCSI TYPE FOR YOUR CHOICE

The RH30 is a raliable,lightweight Removable Rack for 3.5"AT/IDE or SCSI derices as.MO,ZIP,LS120,TYPE,H.D.D.,Users Can easily replace,and add devices without opening the PC Case.

RH-30 Specifications

¡@

Environment Specifications
	Operation	Storage
Ambient Temperature	-5¢XC to 45¢XC	-20¢XC to 60¢XC
Relative Humidity(1)	10% to 80%	10% to 90%
Alititude	-1000 to 50,000 ft	-1,000 to 50,000 ft
	-304m to 15240m	-300m to 15,240
Shock	More then Storage Driver

(1)Non-condensing with maximum Gradient of 10%per hour

¡@

PHYSICAL DIMENSIONS

Physical specifications	Inner Rack Driver Carrier	Outer frame Receiving Frame
Height	35.70mm (1.406")	42.40mm (1.669")
Width	119.00mm (4.685")	146.00mm (5.748")
Depth	202.00mm (7.952")	219.00mm (8.622")
Weight	0.3Kg(0.66 Ibs)	0.2Kg (0.44IIbs)

¡@

Chassis Reliability/Maintainability
MTBF	500,000.Hours
Connector insert cycle	Surpass 2,500times
Preventive Maintenance	None

The Mobile Rack was made with heat-spreading vents on front side and from those vents air is into H.D.D. Hence the High-Capacity H.D.D. would be with good performance of heat-spreading and would easily read data without any mistakes.

E-Mail: gigacorp@videotron.ca